Supercross Carbon BMX Bars

Supercross Carbon BMX Bars

Supercross Carbon BMX Bars

The Supercross BMX Carbon Pro Bar is designed for the ultimate racer; For the rider who demands maximum stiffness and performance. They are not for everyone. If you’re looking for the pinnacle of racing handlebars, then keep on reading. If not, you’re bound to find something you’ll love within our large collection of 4130 Cro-mo Heat Treated Pro Bars.

In order to build the Ultimate Carbon Pro Race Bar,  we needed maximum stiffness, ultimate strength, and efficient power transfer to pull out of the gate while transmitting  every bit of it through the first pedal. These handlebars give you maximum control with no latency. No flex here! Every bit of track noise is transmitted directly to the rider for increased rider sensitivity and instantaneous steering.   

With it's full Monocoque Torray T-700S High Compaction Construction, these bars sport the same construction as the ENVY BLK Race frame and the BLK Forks. These handlebars are constructed through the same time consuming hand layup , wrapping, and molding, ensuring that every set is meticulously inspected and crafted with quality at the forefront. These are bars you know you can trust!

The Supercross Pro Carbon handlebar utilizes a larger 31.8mm Oversized Clamping area to provide better grip and increased resistance to handlebar slippage.  The increased clamping area increase the front end lateral stiffness even more, providing a rock solid response to the strongest of steering inputs. You’re getting better front end control while maintaining the standard 7/8" grip and Brake Lever area.

The Bend and Sweep is the same as our infamous Flatline Bar, so it is easy for you to upgrade and stay comfortable.

Supercross Pro Carbon - 7.5" Rise
Width - 28"
Rise - 7.5"
Back Sweep - 6º
Up Sweep- 2º
Clamp Width - 50 mm
Bar Weight - 12 ounces ( 350 Grams )

Supercross Pro Carbon - 8" Rise
Width - 28"
Rise - 8"
Back Sweep - 6º
Up Sweep- 2º
Clamp Width - 50 mm
Bar Weight - 14 ounces ( 390 Grams )

Supercross Pro Carbon - 8.5" Rise
Width - 30"
Rise - 8.5"
Back Sweep - 6º
Up Sweep- 2º
Clamp Width - 50 mm
Bar Weight - 16 ounces ( 450 Grams )

Oh and did we say there's no weight limit?? However, these are a racing handlebar. We recommend that you know your own personal limits. Just like a cro-mo bar, or aluminum bar, these can and will break under the right ( or wrong ) circumstances. Ensure that you are only using these bars in their intended use case which is on the track. But rest assured that these have been tested to the EXTREME limits before being made available to the public.

Looking for some help with the install? Check out our blog post that breaks down the whole install process. 

The Torque Spec is 6nm. For the Clamp area. Can't find a Torque Wrench, we got em here for you Torque Key

Don’t forget about the Carbon Paste either to help with your assembly.

All torque specs must be adhered to for proper operation. Failure to follow these guidelines could result in subpar performance and risk of injury.